Interlock Defeat / Device Disable
Management System v1.5 (Driver)

Accelerator Complex:



Home
List of Defeats   ▸
List of Disables ▸
Fill Out a Defeat
Fill Out a Disable
Add/Modify User
Add/Modify System
Login
Help
Implementation Removal

Interlock Defeat


Vacuum

EACA:IG1E interlocks bypassed
Implementation: Number:
2023-05-29 11:30:00 2023-279

Brandon Humphries

Removed
Estimated Duration:
2 weeks

EACA:IP1E must be run in local mode due to a faulty cable (E-Fault 15848). So to allow the ion gauge in the same section (EACA:IG1E) to remain running, it must be bypassed.

2

1-On ESS panel



1-On cork board in the back of the DCR

EACA:IG1E interlocks were bypassed through the Bypass/Force function in EPICS. EACA:IG1E is physically located in the E-Hall and it's controller is on the E-Hall roof.

If the pressure becomes too high, the IG has its own electronically embedded protection to trip off. Confirmed that RF trip box will still trip if IG reading gets too high.

15848